Netgear XSM4324FS CLI Manual Software Version 12.x - Page 67
serviceport ipv6 neighbor
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Format Mode serviceport ipv6 gateway gateway-address Privileged EXEC Parameter gateway-address Description Gateway address in IPv6 global or link-local address format. no serviceport ipv6 gateway Use this command to remove IPv6 gateways on the service port interface. Format Mode no serviceport ipv6 gateway Privileged EXEC serviceport ipv6 neighbor Use this command to manually add IPv6 neighbors to the IPv6 neighbor table for the service port. If an IPv6 neighbor already exists in the neighbor table, the entry is automatically converted to a static entry. Static entries are not modified by the neighbor discovery process. They are, however, treated the same for IPv6 forwarding. Static IPv6 neighbor entries are applied to the hardware when the corresponding interface is operationally active. Format Mode serviceport ipv6 neighbor ipv6-address macaddr Privileged EXEC Parameter ipv6-address macaddr Description The IPv6 address of the neighbor or interface. The link-layer address. no serviceport ipv6 neighbor Use this command to remove IPv6 neighbors from the IPv6 neighbor table for the service port. Format Mode no serviceport ipv6 neighbor ipv6-address macaddr Privileged EXEC Management Commands 67 CLI Command Reference Manual