Netgear XSM4324FS CLI Manual Software Version 12.x - Page 721
area default-cost OSPF, area nssa OSPF, area nssa default-info-originate OSPF, NSSA. The optional
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 721 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches area default-cost (OSPF) This command configures the default cost for the stub area. For the value argument, you must specify an integer value between 1-16777215. Format Mode area area-id default-cost value Router OSPF Config area nssa (OSPF) This command configures the specified area-id to function as an NSSA. Format Mode area area-id nssa Router OSPF Config no area nssa This command disables nssa from the specified area id. Format Mode no area area-id nssa Router OSPF Config area nssa default-info-originate (OSPF) This command configures the metric value and type for the default route advertised into the NSSA. The optional metric parameter specifies the metric of the default route and must be in the range 1-16777214. If no metric is specified, the default value is ****. The metric type can be comparable (nssa-external 1) or noncomparable (nssa-external 2). Format Mode area area-id nssa default-info-originate [metric] [comparable | non-comparable] Router OSPF Config no area nssa default-info-originate (OSPF) This command disables the default route advertised into the NSSA. Format Mode no area area-id nssa default-info-originate [metric] [comparable | non-comparable] Router OSPF Config Routing Commands 721 CLI Command Reference Manual