Netgear XSM4324FS CLI Manual Software Version 12.x - Page 269
ip dhcp excluded-address, ip dhcp ping packets, no option
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no option This command removes the DHCP Server options. The code parameter specifies the DHCP option code. Format Mode no option code DHCP Pool Config ip dhcp excluded-address This command specifies the IP addresses that a DHCP server should not assign to DHCP clients. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Default Format Mode none ip dhcp excluded-address lowaddress [highaddress] Global Config no ip dhcp excluded-address This command removes the excluded IP addresses for a DHCP client. Low-address and high-address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid. Format Mode no ip dhcp excluded-address lowaddress [highaddress] Global Config ip dhcp ping packets Use this command to specify the number, in a range from 2-10, of packets a DHCP server sends to a pool address as part of a ping operation. By default the number of packets sent to a pool address is 2, which is the smallest allowed number when sending packets. Setting the number of packets to 0 disables this command. Default Format Mode 2 ip dhcp ping packets number Global Config Utility Commands 269 CLI Command Reference Manual