Netgear XSM4324FS CLI Manual Software Version 12.x - Page 759
show ip ospf asbr, the optional
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 759 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ip ospf asbr This command displays the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR). This command takes no options. Format Mode show ip ospf asbr Privileged EXEC User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be one of the following values: • intra - Intra-area route • inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ip ospf database This command displays information about the link state database when OSPF is enabled. If you do not enter any parameters, the command displays the LSA headers for all areas. Use the optional area-id parameter to display database information about a specific area. Use the optional parameters to specify the type of link state advertisements to display. Format Mode show ip ospf [[area-id] database [{database-summary | [{asbr-summary | external | network | nssa-external | opaque-area | opaque-as | opaque-link | router | summary}] [lsid] [{adv-router [ipaddr] | self-originate}]}]] Privileged EXEC User EXEC Parameter asbr-summary external network nssa-external opaque-area opaque-as Description Displays the autonomous system boundary router (ASBR) summary LSAs. Displays the external LSAs. Displays the network LSAs. DisplayS NSSA external LSAs. Displays area opaque LSAs. Displays AS opaque LSAs. Routing Commands 759 CLI Command Reference Manual