Netgear XSM4324FS CLI Manual Software Version 12.x - Page 494

M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description jointime seconds The interval between the transmission of MRP PDUs registering (or reregistering) membership for an attribute. There is an instance of this timer on a per-port, per-MRP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds). The finest granularity of specification is one centisecond (0.01 seconds). leavetime seconds The period of time to wait after receiving an unregister request for an attribute before deleting the attribute. You can consider this a buffer time for another station to assert registration for the same attribute in order to maintain uninterrupted service. There is an instance of this timer on a per-Port, per-MRP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 300 centiseconds (3.0 seconds). leavealltime seconds The LeaveAllTime controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates that all registrations are shortly to be deregistered. Participants must to rejoin in order to maintain registration. There is an instance of this timer on a per-port, per-MRP participant basis. The Leave All Period Timer is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 2000 centiseconds (20 seconds). show mrp This command displays MRP leave, join, and leaveall intervals configured on interfaces. If you specify the summary parameter, the output shows interval values for all interfaces. If you specify the unit/slot/port parameter, the output shows the MRP intervals for the specified interface. Format Mode show mrp interface {summary | unit/slot/port} Privileged Exec MMRP Commands mmrp (Global Config) Use this command in Global Config mode to enable MMRP. MMRP must also be enabled on the individual interfaces. Default Format Mode Disabled mmrp Global Config Switching Commands 494 CLI Command Reference Manual