Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1080
show ipv6 mld groups, no ipv6 mld version
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1080 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no ipv6 mld version This command resets the MLD version used by the interface to the default value. Format Mode no ipv6 mld Interface Config show ipv6 mld groups Use this command to display information about multicast groups that MLD reported. The information is displayed only when MLD is enabled on at least one interface. If MLD was not enabled on even one interface, there is no group information to be displayed. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. You can also specify a group address (group-address). Format Mode show ipv6 mld groups {unit/slot/port | vlan vland-id | group-address} Privileged EXEC User EXEC The following fields are displayed as a table when unit/slot/port is specified. Field Group Address Interface Up Time Expiry Time Description The address of the multicast group. Interface through which the multicast group is reachable. Time elapsed in hours, minutes, and seconds since the multicast group has been known. Time left in hours, minutes, and seconds before the entry is removed from the MLD membership table. When group-address is specified, the following fields are displayed for each multicast group and each interface. Field Interface Group Address Last Reporter Filter Mode Description Interface through which the multicast group is reachable. The address of the multicast group. The IP Address of the source of the last membership report received for this multicast group address on that interface. The filter mode of the multicast group on this interface. The values it can take are include and exclude. IPv6 Multicast Commands 1080 CLI Command Reference Manual