Netgear XSM4324FS CLI Manual Software Version 12.x - Page 21

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 6. CLI Mode Access and Exit (continued) Command Mode Access Method Exit or Access Previous Mode Interface Config From the Global Config mode, enter: interface unit/slot/port From the Global Config mode, enter: interface loopback id From the Global Config mode, enter: interface tunnel id From the Global Config mode, enter: interface unit/slot/port(startrange)unit/slot/port(endrange) To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. From the Global Config mode, enter: interface lag lag-intf-num From the Global Config mode, enter: interface vlan vlan-id Line Console From the Global Config mode, enter line console. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Line SSH From the Global Config mode, enter line ssh. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Line Telnet From the Global Config mode, enter line telnet. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. AAA IAS User Config From the Global Config mode, enter aaa ias-user username name. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Mail Server Config From the Global Config mode, enter mail-server address. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Policy-Map Config From the Global Config mode, enter policy-map. To exit to the Global Config mode, enter exit. To return to the Privileged EXEC mode, enter Ctrl-Z. Policy-Class-Map From the Policy Map mode enter class. To exit to the Policy Map mode, enter exit. To Config return to the Privileged EXEC mode, enter Ctrl-Z. Class-Map Config From the Global Config mode, enter To exit to the Global Config mode, enter exit. class-map, and specify the optional To return to the Privileged EXEC mode, enter keyword ipv4 to specify the Layer 3 Ctrl-Z. protocol for this class. See class-map on page 934 for more information. Software Modules 21 CLI Command Reference Manual