Netgear XSM4324FS CLI Manual Software Version 12.x - Page 460
dot1x max-users, dot1x port-control, force-unauthorized, mac-based
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 460 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no dot1x max-req This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. Format Mode no dot1x max-req Interface Config dot1x max-users Use this command to set the maximum number of clients supported on an interface or range of interfaces when MAC-based dot1x authentication is enabled on the port. The maximum users supported per port is dependent on the product. The count parameter must be in the range 1-48. Default Format Mode 48 dot1x max-users count Interface Config no dot1x max-users This command resets the maximum number of clients allowed per port to its default value. Format Mode no dot1x max-users Interface Config dot1x port-control This command sets the authentication mode to use on the specified interface or range of interfaces. Use the force-unauthorized parameter to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized. Use the force-authorized parameter to specify that the authenticator PAE unconditionally sets the controlled port to authorized. Use the auto parameter to specify that the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator and the authentication server. If the mac-based parameter is specified, then MAC-based dot1x authentication is enabled on the port. Default Format Mode auto dot1x port-control {force-unauthorized | force-authorized | auto | mac-based} Interface Config Switching Commands 460 CLI Command Reference Manual