Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1001
show iscsi, no iscsi target port
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1001 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Parameter Description tcp-port-n TCP port number or list of TCP port numbers on which the iSCSI target listens to requests. Up to 16 TCP ports can be defined in the system in one command or by using multiple commands. ip-address IP address of the iSCSI target. When the no form of this command is used, and the tcp port to be deleted is one bound to a specific IP address, the address field must be present. targetname iSCSI name of the iSCSI target. The name can be statically configured; however, it can be obtained from iSNS or from sendTargets response. The initiator must present both its iSCSI Initiator Name and the iSCSI Target Name to which it wishes to connect in the first login request of a new session or connection. Command example: The following example configures TCP Port 49154 to target IP address 172.16.1.20: (NETGEAR Switch)(config)#iscsi target port 49154 address 172.16.1.20 no iscsi target port Use the no iscsi target port command to delete an iSCSI target port, address, and name. Format Mode no iscsi target port Global Config show iscsi This command displays the iSCSI settings. Format Mode show iscsi Privileged EXEC Command example: The following example shows the default configuration: (NETGEAR Switch)#show iscsi iSCSI disabled iSCSI vpt is 5, remark Session aging time: 10 min Maximum number of sessions is 192 iSCSI Targets and TCP ports: TCP Port Target IP Address Name 860 Not Configured Not Configured 3260 Not Configured Not Configured Quality of Service Commands 1001 CLI Command Reference Manual