Netgear XSM4324FS CLI Manual Software Version 12.x - Page 857
OSPFv3 Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 857 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Definition ICMPv6 Router Solicit Messages Number of ICMP Router Solicitation messages sent by the interface. Transmitted ICMPv6 Router Advertisement Messages Transmitted Number of ICMP Router Advertisement messages sent by the interface. ICMPv6 Neighbor Solicit Messages Number of ICMP Neighbor Solicitation messages sent by the interface. Transmitted ICMPv6 Neighbor Advertisement Messages Transmitted Number of ICMP Neighbor Advertisement messages sent by the interface. ICMPv6 Redirect Messages Received Number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. ICMPv6 Group Membership Query Number of ICMPv6 Group Membership Query messages sent. Messages Transmitted ICMPv6 Group Membership Number of ICMPv6 Group Membership Response messages sent. Response Messages Transmitted ICMPv6 Group Membership Number of ICMPv6 Group Membership Reduction messages sent. Reduction Messages Transmitted ICMPv6 Duplicate Address Detects Number of duplicate addresses detected by the interface. clear ipv6 statistics Use this command to clear IPv6 statistics for all interfaces or for a specific interface, including loopback and tunnel interfaces. IPv6 statistics display in the output of the show ipv6 traffic command. If you do not specify an interface, the counters for all IPv6 traffic statistics reset to zero. Format Mode clear ipv6 statistics [{unit/slot/port | loopback loopback-id | tunnel tunnel-id}] Privileged EXEC OSPFv3 Commands This section describes the commands you use to configure OSPFv3, which is a link-state routing protocol that you use to route traffic within a network. This section includes the following subsections: • Global OSPFv3 Commands on page 858 • OSPFv3 Interface Commands on page 874 • OSPFv3 Graceful Restart Commands on page 879 • OSPFv3 Stub Router Commands on page 883 IPv6 Commands 857 CLI Command Reference Manual