Netgear XSM4324FS CLI Manual Software Version 12.x - Page 142
radius accounting mode, radius server attribute 4, no server-key
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no server-key Use this command to remove the global shared secret key configuration. Format Mode no server-key Dynamic Authorization radius accounting mode This command is used to enable the RADIUS accounting function. Default Format Mode disabled radius accounting mode Global Config no radius accounting mode This command is used to set the RADIUS accounting function to the default value - i.e. the RADIUS accounting function is disabled. Format Mode no radius accounting mode Global Config radius server attribute 4 This command specifies the RADIUS client to use the NAS-IP Address attribute in the RADIUS requests. If the specific IP address is configured while enabling this attribute, the RADIUS client uses that IP address while sending NAS-IP-Address attribute in RADIUS communication. Format Mode Term 4 ipaddr radius server attribute 4 [ipaddr] Global Config Definition NAS-IP-Address attribute to be used in RADIUS requests. The IP address of the server. Management Commands 142 CLI Command Reference Manual