Netgear XSM4324FS CLI Manual Software Version 12.x - Page 257

M4300 Intelligent Edge Series Fully Managed Stackable Switches Time Zone Commands Use the Time Zone commands to configure system time and date, Time Zone and Summer Time (that is, Daylight Saving Time). Summer time can be recurring or non-recurring. clock set This command sets the system time and date. Format Mode clock set hh:mm:ss clock set mm/dd/yyyy Global Config Parameter Description hh:mm:ss Enter the current system time in 24-hour format in hours, minutes, and seconds. The range is hours: 0 to 23, minutes: 0 to 59, seconds: 0 to 59. mm/dd/yyyy Enter the current system date the format month, day, year. The range for month is 1 to 12. The range for the day of the month is 1 to 31. The range for year is 2010 to 2079. Command example: (NETGEAR Switch) (Config)# clock set 03:17:00 (NETGEAR Switch) (Config)# clock set 11/01/2011 clock summer-time date Use the clock summer-time date command to set the summer-time offset to Coordinated Universal Time (UTC). If the optional parameters are not specified, they are read as either 0 or \0, as appropriate. Format Mode clock summer-time date {date month year hh:mm date month year hh:mm}[offset offset] [zone acronym] Global Config Parameter date month year hh:mm Description Day of the month. Range is 1 to 31. Month. Range is the first three letters by name; jan, for example. Year. The range is 2000 to 2097. Time in 24-hour format in hours and minutes. The range is hours: 0 to 23, minutes: 0 to 59. Utility Commands 257 CLI Command Reference Manual