Netgear XSM4324FS CLI Manual Software Version 12.x - Page 996
show auto-voip
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 996 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show auto-voip Use this command to display the auto VoIP settings on one particular interface or on all interfaces of the switch. Format Mode show auto-voip {protocol-based | oui-based} interface {unit/slot/port | all} Privileged EXEC Field Description VoIP VLAN ID The global VoIP VLAN ID. Prioritization Type The type of prioritization used on voice traffic. Class Value • If the Prioritization Type is configured as traffic-class, then this value is the queue value. • If the Prioritization Type is configured as remark, then this value is 802.1p priority used to remark the voice traffic. Priority The 802.1p priority. This field is valid for OUI auto VoIP. AutoVoIP Mode The Auto VoIP mode on the interface. Command example: (NETGEAR Switch)# show auto-voip protocol-based interface all VoIP VLAN Id 2 Prioritization Type traffic-class Class Value 7 Interface --------0/1 0/2 0/3 0/4 Auto VoIP Operational Status Mode Disabled Down Disabled Down Disabled Down Disabled Down Command example: (NETGEAR Switch)# show auto-voip oui-based interface all VoIP VLAN Id 2 Priority 7 Interface Auto VoIP Operational Status Mode 0/1 Disabled Down 0/2 Disabled Down 0/3 Disabled Down Quality of Service Commands 996 CLI Command Reference Manual