Netgear XSM4324FS CLI Manual Software Version 12.x - Page 212

M4300 Intelligent Edge Series Fully Managed Stackable Switches 15310 switchdrvr 15314 syncdb 18718 lighttpd 18720 lua_magnet 18721 lua_magnet 2-switchdrvr 3-syncdb 4-lighttpd 4-lighttpd 4-lighttpd No 177220 177408 57 No 2060 2080 8 No 5508 5644 11 Yes 12112 12112 7 Yes 25704 25708 7 show running-config Use this command to display or capture the current setting of different protocol packages supported on the switch. This command displays or captures commands with settings and configurations that differ from the default value. To display or capture the commands with settings and configurations that are equal to the default value, include the all option. Note: The show running-config command does not display the User Password, even if you set one different from the default. The output is displayed in script format, which can be used to configure another switch with the same configuration. If the optional scriptname is provided with a file name extension of .scr, the output is redirected to a script file. Note: If you issue the show running-config command from a serial connection, access to the switch through remote connections (such as Telnet) is suspended while the output is being generated and displayed. Note: If you use a text-based configuration file, the show running-config command only displays configured physical interfaces (i.e. if any interface only contains the default configuration, that interface will be skipped from the show running-config command output). This is true for any configuration mode that contains nothing but default configuration. That is, the command to enter a particular config mode, followed immediately by its exit command, are both omitted from the show running-config command output (and hence from the startup-config file when the system configuration is saved.) Utility Commands 212 CLI Command Reference Manual