Netgear XSM4324FS CLI Manual Software Version 12.x - Page 905
domain-name IPv6, dns-server IPv6, This command removes dhcpv6 domain name from dhcpv6 pool.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 905 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Command example: The following example configures an IPv6 address prefix for the IPv6 configuration pool pool1: (NETGEAR Switch) #configure (NETGEAR Switch) (Config)# ipv6 dhcp pool pool1 (NETGEAR Switch) (Config-dhcp6s-pool)# address prefix 2001::/64 (NETGEAR Switch) (Config-dhcp6s-pool)# exit domain-name (IPv6) This command sets the DNS domain name which is provided to DHCPv6 client by DHCPv6 server. DNS domain name is configured for stateless server support. Domain name consist of no more than 31 alpha-numeric characters. DHCPv6 pool can have multiple number of domain names with maximum of 8. Format Mode domain-name dns-domain-name IPv6 DHCP Pool Config no domain-name This command removes dhcpv6 domain name from dhcpv6 pool. Format Mode no domain-name dns-domain-name IPv6 DHCP Pool Config dns-server (IPv6) This command sets the IPv6 DNS server address, which is provided to DHCPv6 clients by the DHCPv6 server. The DNS server address is configured for stateless server support. The DHCPv6 pool can contains a maximum of eight domain names. Format Mode dns-server dns-server-address IPv6 DHCP Pool Config no dns-server This command removes a DHCPv6 server address from a DHCPv6 server. Format Mode no dns-server dns-server-address IPv6 DHCP Pool Config IPv6 Commands 905 CLI Command Reference Manual