Netgear XSM4324FS CLI Manual Software Version 12.x - Page 154

M4300 Intelligent Edge Series Fully Managed Stackable Switches show radius source-interface Use this command in Privileged EXEC mode to display the configured RADIUS client source-interface (Source IP address) information. Format Mode show radius source-interface Privileged Exec Command example: (NETGEAR Switch)# show radius source-interface RADIUS Client Source Interface not configured) show radius statistics This command displays the summary statistics of configured RADIUS Authenticating servers. Format Mode show radius statistics {ipaddr | dnsname | name servername} Privileged EXEC Term Definition ipaddr The IP address of the server. dnsname The DNS name of the server. servername The alias name to identify the server. RADIUS Server Name The name of the authenticating server. Server Host Address The IP address of the host. Access Requests The number of RADIUS Access-Request packets sent to this server. This number does not include retransmissions. Access The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication Retransmissions server. Access Accepts The number of RADIUS Access-Accept packets, including both valid and invalid packets, that were received from this server. Access Rejects The number of RADIUS Access-Reject packets, including both valid and invalid packets, that were received from this server. Access Challenges The number of RADIUS Access-Challenge packets, including both valid and invalid packets, that were received from this server. Malformed Access The number of malformed RADIUS Access-Response packets received from this server. Malformed Responses packets include packets with an invalid length. Bad authenticators or signature attributes or unknown types are not included as malformed access responses. Management Commands 154 CLI Command Reference Manual