Netgear XSM4324FS CLI Manual Software Version 12.x - Page 94

M4300 Intelligent Edge Series Fully Managed Stackable Switches show loginsession This command displays current Telnet, SSH and serial port connections to the switch. This command displays truncated user names. Use the show loginsession long command to display the complete usernames. Format Mode show loginsession Privileged EXEC Term ID User Name Connection From Idle Time Session Time Session Type Definition Login Session ID. The name the user entered to log on to the system. IP address of the remote client machine or EIA-232 for the serial port connection. Time this session has been idle. Total time this session has been connected. Shows the type of session, which can be HTTP, HTTPS, telnet, serial, or SSH. show loginsession long This command displays the complete user names of the users currently logged in to the switch. Format Mode show loginsession long Privileged EXEC Command example: (NETGEAR Switch) #show loginsession long User Name -----------admin test1111test1111test1111test1111test1111test1111test1111test1111 User Account Commands This section describes the commands you use to add, manage, and delete switch users. The switch provides two default users: admin and guest. The admin user can view and configure the switch settings. The guest user can view the switch settings only. The first time that you log in as an admin user, no password is required (that is, the password is blank). As of software version 12.0.9.3, after you log in for the first time, you are required to Management Commands 94 CLI Command Reference Manual