Netgear XSM4324FS CLI Manual Software Version 12.x - Page 791
Captive Portal Configuration Commands
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 791 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show captive-portal trapflags This command shows which captive portal SNMP traps are enabled. The show trapflags command shows the global captive portal traps configuration. For more information, see the sample output of show trapflags on page 136. Format Mode show captive-portal trapflags Privileged EXEC Term Description Client Authentication Failure Traps Shows whether the SNMP agent sends a trap when a client attempts to authenticate with a captive portal but is unsuccessful. Client Connection Shows whether the SNMP agent sends a trap when a client authenticates with and connects to a Traps captive portal. Client Database Full Traps Shows whether the SNMP agent sends a trap each time an entry cannot be added to the client database because it is full. Client Disconnection Traps Shows whether the SNMP agent sends a trap when a client disconnects from a captive portal. Captive Portal Configuration Commands The commands in this section are related to captive portal configurations. configuration (for captive portal) Use this command to enter the Captive Portal Instance Mode. The captive portal configuration, identified by CP ID 1, is the default CP configuration. You can create up to nine additional captive portal configurations. The system supports a total of ten CP configurations. The Captive Portal ID cp-id variable is a number in the range of 1-10. Format Mode configuration cp-id Captive Portal Config Captive Portal Commands 791 CLI Command Reference Manual