Netgear XSM4324FS CLI Manual Software Version 12.x - Page 231

M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Log System Time Up Trap Definition The log number. How long the system had been running at the time the trap was sent. The text of the trap message. clear logging buffered This command clears buffered logging (system startup and system operation logs). Format Mode clear logging buffered Privileged EXEC clear eventlog This command clears all event messages that are stored on the switch. Format Mode clear eventlog Privileged EXEC Email Alerting and Mail Server Commands logging email This command enables email alerting and sets the lowest severity level for which log messages are emailed. If you specify a severity level, log messages at or above this severity level, but below the urgent severity level, are emailed in a non-urgent manner by collecting them together until the log time expires. You can specify the severitylevel value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode disabled; when enabled, log messages at or above severity Warning (4) are emailed logging email [severitylevel] Global Config no logging email This command disables email alerting. Format Mode no logging email Global Config Utility Commands 231 CLI Command Reference Manual