Netgear XSM4324FS CLI Manual Software Version 12.x - Page 556
mvr querytime, mvr vlan, mvr immediate, no mvr mode
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 556 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no mvr mode This command sets the mode type to the default value. Format Mode no mvr mode Global Config mvr querytime This command sets the MVR query response time in deciseconds. The time is in the range 1-100 deciseconds (one decisecond is one tenth of a second). Default Format Mode 5 mvr querytime deciseconds Global Config no mvr querytime This command sets the MVR query response time to the default value. Format Mode no mvr querytime Global Config mvr vlan This command sets the MVR multicast VLAN. Default Format Mode 1 mvr vlan vlan-id Global Config no mvr vlan This command sets the MVR multicast VLAN to the default value. Format Mode no mvr vlan Global Config mvr immediate This command enables MVR immediate leave mode. MVR provides two modes of operating with the IGMP Leave messages: normal leave and immediate leave. • In normal leave mode, when a leave is received, the general IGMP query is sent from a Layer 2 switch to the receiver port, where the leave was received. Then reports are Switching Commands 556 CLI Command Reference Manual