Netgear XSM4324FS CLI Manual Software Version 12.x - Page 300
The remaining fields in the trace are specific to the type of OSPF Packet.
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches JAN 02 11:03:37 10.50.50.1-2 OSPF[46300472]: ospf_debug.c(293) 25441 % Pkt TX Intf:2/0/48 Src Ip:10.50.50.1 DestIp:224.0.0.6 AreaId:0.0.0.0 Type:LS_ACK Length: 1500 The following parameters are displayed in the trace message. Parameter TX/RX Intf SrcIp DestIp AreaId Type Definition TX refers to a packet transmitted by the device. RX refers to packets received by the device. The interface that the packet came in or went out on. Format used is unit/slot/port (internal interface number). The source IP address in the IP header of the packet. The destination IP address in the IP header of the packet. The area ID in the OSPF header of the packet. Could be one of the following: • HELLO. Hello packet • DB_DSCR. Database descriptor • LS_REQ. LS Request • LS_UPD. LS Update • LS_ACK. LS Acknowledge The remaining fields in the trace are specific to the type of OSPF Packet. HELLO packet field definitions. Parameter Netmask DesignRouter Backup Definition The netmask in the hello packet. Designated Router IP address. Backup router IP address. DB_DSCR packet field definitions. Field MTU Options Flags Seq Definition MTU Options in the OSPF packet. Could be one or more of the following: • I. Init • M. More • MS. Master/Slave Sequence Number of the DD packet. Utility Commands 300 CLI Command Reference Manual