Netgear XSM4324FS CLI Manual Software Version 12.x - Page 1082
parameter are used to specify the VLAN
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1082 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches show ipv6 mld interface Use this command to display MLD-related information for the interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter is a number in the range of 1-4093. Format Mode show ipv6 mld interface {unit/slot/port | vlan vland-id} Privileged EXEC User EXEC The following information is displayed for each of the interfaces or for only the specified interface. Field Description Interface The interface number in unit/slot/port format. MLD Mode Displays the configured administrative status of MLD. Operational Mode The operational status of MLD on the interface. MLD Version Indicates the version of MLD configured on the interface. Query Interval Indicates the configured query interval for the interface. Query Max Response Time Indicates the configured maximum query response time (in seconds) advertised in MLD queries on this interface. Robustness Displays the configured value for the tuning for the expected packet loss on a subnet attached to the interface. Startup Query interval This valued indicates the configured interval between General Queries sent by a Querier on startup. Startup Query Count This value indicates the configured number of Queries sent out on startup, separated by the Startup Query Interval. Last Member Query Interval This value indicates the configured Maximum Response Time inserted into Group-Specific Queries sent in response to Leave Group messages. Last Member Query Count This value indicates the configured number of Group-Specific Queries sent before the router assumes that there are no local members. The following information is displayed if the operational mode of the MLD interface is enabled. Field Querier Status Querier Address Description This value indicates whether the interface is an MLD querier or non-querier on the subnet it is associated with. The IP address of the MLD querier on the subnet the interface is associated with. IPv6 Multicast Commands 1082 CLI Command Reference Manual