Netgear XSM4324FS CLI Manual Software Version 12.x - Page 780
show ip rip interface brief, ip rip
View all Netgear XSM4324FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 780 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Term Auto Summary Mode Host Routes Accept Mode Global Route Changes Global queries Default Metric Default Route Advertise Definition Enable or disable. If enabled, groups of adjacent routes are summarized into single entries, in order to reduce the total number of entries The default is enable. Enable or disable. If enabled the router accepts host routes. The default is enable. The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age. The number of responses sent to RIP queries from other systems. The default metric of redistributed routes if one has already been set, or blank if not configured earlier. The valid values are 1 to 15. The default route. show ip rip interface brief This command displays general information for each RIP interface. For this command to display successful results, routing must be enabled per interface (for example, through the ip rip command). Format Modes show ip rip interface brief Privileged EXEC User EXEC Term Interface IP Address Send Version Receive Version RIP Mode Link State Definition unit/slot/port The IP source address used by the specified RIP interface. The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-1, RIP-1c, RIP-2 The RIP version(s) allowed when receiving updates from the specified interface. The types are none, RIP-1, RIP-2, Both The administrative mode of router RIP operation (enabled or disabled). The mode of the interface (up or down). show ip rip interface This command displays information related to a particular RIP interface. The argument unit/slot/port corresponds to a physical routing interface or VLAN routing interface. The vlan keyword and vlan-id parameter are used to specify the VLAN ID of the routing VLAN directly instead of in a unit/slot/port format. The vlan-id can be a number from 1-4093. Routing Commands 780 CLI Command Reference Manual