D-Link DGS-3130 Emulator - Page 105

Parameters GROUP-NAME DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Specifies the name of the server group. This name can be up to 32 characters long. The syntax is a general string that does not allow spaces. Default There is no AAA group server. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline Use this command to enter the TACACS+ group server configuration mode. Use the server command to associate the TACACS+ server hosts with the TACACS+ server group. The defined server group can be specified as the method list for authentication, or accounting by using the aaa authentication and aaa accounting commands. Example This example shows how to create a TACACS+ server group with two entries. Switch#configure terminal Switch(config)#aaa group server tacacs+ group1 Switch(config-sg-tacacs+)# server 172.19.10.100 Switch(config-sg-tacacs+)# server 172.19.11.20 Switch(config-sg-tacacs+)# 8-13 aaa new-model This command is used to enable AAA for the authentication or accounting function. Use the no form of this command to disable the AAA function. aaa new-model no aaa new-model Parameters None. Default By default, this feature is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 15. 101