D-Link DGS-3130 Emulator - Page 406
show gvrp statistics
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to display the GVRP configuration for the global configuration. Switch# show gvrp configuration Global GVRP State : Enabled Dynamic VLAN Creation : Disabled NNI BPDU Address : Dot1d Switch# This example shows how to display the GVRP configuration on interfaces ethernet 1/0/5 to 1/06. Switch# show gvrp configuration interface ethernet 1/0/5-1/0/6 ethernet 1/0/5 GVRP Status Join Time Leave Time Leave-All Time Advertise VLAN Forbidden VLAN : Enabled : 20 centiseconds : 60 centiseconds : 1000 centiseconds : 1-4094 : 3-5 ethernet 1/0/6 GVRP Status Join Time Leave Time Leave-All Time Advertise VLAN Forbidden VLAN : Enabled : 20 centiseconds : 60 centiseconds : 1000 centiseconds : 1-3 : 5-8 Switch# 36-10 show gvrp statistics This command is used to display the statistics for a GVRP port. show gvrp statistics [interface INTERFACE-ID [, | -]] Parameters interface INTERFACE-ID , - (Optional) Specifies the interfaces to be displayed. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User EXEC Mode. Any Configuration Mode. 402
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/406.png)