D-Link DGS-3130 Emulator - Page 649
mls qos aggregate-policer
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 649 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide ntp - Network Time Protocol. ospf - Open Shortest Path First. pppoe - Point-to-Point Protocol over Ethernet. rip - Routing Information Protocol. rtsp - Real-Time Streaming Protocol. ssh - Secured shell. telnet - Telnet. tftp - Trivial File Transfer Protocol. Example This example shows how to specify a class map called "class-home-user" and configures the access list named "acl-home-user" to be used as the match criterion for that class. Switch# configure terminal Switch(config)# class-map class-home-user Switch(config-cmap)# match access-group name acl-home-user Switch(config-cmap)# This example shows how to specify a class map called "cos" and specifies that the CoS values of 1, 2, and 3 are match criteria for the class. Switch# configure terminal Switch(config)# class-map cos Switch(config-cmap)# match cos 1,2,3 Switch(config-cmap)# This example shows how classes called voice and video-n-data are created to classify traffic based on the CoS values. QoS treatment is then given to the appropriate packets in the cos-based-treatment policy map (in this example, the QoS treatment is a single rate policer and a two rate policer for class voice and video-n-data respectively). The service policy configured in this example is attached to ethernet 1/0/1. Switch# configure terminal Switch(config)# class-map voice Switch(config-cmap)# match cos 7 Switch(config-cmap)# exit Switch(config)# class-map video-n-data Switch(config-cmap)# match cos 5 Switch(config-cmap)# exit Switch(config)# policy-map cos-based-treatment Switch(config-pmap)# class voice Switch(config-pmap-c)# police 8000 1000 exceed-action drop Switch(config-pmap-c)# exit Switch(config-pmap)# class video-n-data Switch(config-pmap-c)# police cir 500000 bc 10000 pir 1000000 be 10000 exceed-action set-dscptransmit 2 violate-action drop Switch(config-pmap-c)# exit Switch(config-pmap)# exit Switch(config)# interface ethernet 1/0/1 Switch(config-if)# service-policy input cos-based-treatment Switch(config-if)# 63-4 mls qos aggregate-policer This command is used to define a named aggregate policer for use in policy maps. Use the no form of this command to delete a named aggregate policer. The mls qos aggregate-policer command is for single rate policing and the mls qos aggregate-policer cir command is for two-rate policing. 645