D-Link DGS-3130 Emulator - Page 415

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide show counters [interface INTERFACE-ID] Parameters interface INTERFACE-ID (Optional) Specifies that the interface can be a physical port, port channel or VLAN interfaces. If no interface is specified, counters of all interfaces will be displayed. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display the statistic counters for an interface. The following items provide detail information about the display parameters of this command:  max-rcv-frame-size: The maximum Ethernet frame size which is defined in Jumbo Frame Commands. The range is from 64 to 9216 bytes. Example This example shows how to display the counters for ethernet 1/0/1. Switch#show counters interface ethernet 1/0/1 eth1/0/1 counters rxHCTotalPkts txHCTotalPkts rxHCUnicastPkts txHCUnicastPkts rxHCMulticastPkts txHCMulticastPkts rxHCBroadcastPkts txHCBroadcastPkts rxHCOctets txHCOctets rxHCPkt64Octets rxHCPkt65to127Octets rxHCPkt128to255Octets rxHCPkt256to511Octets rxHCPkt512to1023Octets rxHCPkt1024to1518Octets rxHCPkt1519to1522Octets rxHCPkt1519to2047Octets rxHCPkt2048to4095Octets rxHCPkt4096to9216Octets txHCPkt64Octets txHCPkt65to127Octets : 67004 : 63918 : 66026 : 46199 : 383 : 9848 : 595 : 7871 : 14339916 : 13420831 : 45325 : 1058 : 0 : 4705 : 15916 : 0 : 0 : 0 : 0 : 0 : 6347 : 21566 411