D-Link DGS-3130 Emulator - Page 75

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# ip http secure-server Switch(config)# 5-7 ip http access-class This command is used to specify an access list to restrict the access to the HTTP server. Use the no form of this command to remove the access list check. ip {http | https} access-class IP-ACL no ip {http | https} access-class IP-ACL Parameters IP-ACL Specifies a standard IP access list. The source address field of the entry defines the valid or invalid host. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command specifies an access list to restrict the access to the HTTP server. If the specified access list does not exist, the command does not take effect, thus no access list is checked for the user's access to HTTP. Example This example shows how a standard IP access list is created and is specified as the access list to access the HTTP server. Only the host 226.1.1.1 is allowed to access the server. Switch# configure terminal Switch(config)# ip access-list http-filter Switch(config-ip-acl)# permit 226.1.1.1 255.255.255.255 Switch(config-ip-acl)# exit Switch(config)# ip http access-class http-filter Switch(config)# 5-8 ip http service-port This command is used to specify the HTTP service port. Use the no form of this command to revert to the default setting. ip http service-port TCP-PORT no ip http service-port 71