D-Link DGS-3130 Emulator - Page 431

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide The command will cause the port to enter the disabled state. Under the disabled state, the port will not be able to receive or transmit any packets. Using the no shutdown command will put the port back into the enabled state. When a port is shut down, the link status will also be turned off. Example This example shows how to enter the shutdown command to disable the port state of interface port 1/0/1. Switch#configure terminal Switch(config)#interface ethernet 1/0/1 Switch(config-if)#shutdown Switch(config-if)# 427