D-Link DGS-3130 Emulator - Page 376

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide erps manual switch ring_port {port0 | port1} Parameters port0 port1 Specifies to manually block ERPS instance port0. Specifies to manually block ERPS instance port1. Default None. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline This command forcibly blocks a port on which MS is configured when link failures and FS conditions are absent. This command is used in ERPSv2 only. Example This example shows how to manually block the major-ring instance 1 port0. Switch#configure terminal Switch(config)#ethernet ring g8032 major-ring Switch(config-erps-ring)#instance 1 Switch(config-erps-ring-instance)#erps manual switch ring_port port0 Switch(config-erps-ring-instance)# 33-23 clear This command is used to clear the local active administrative command. clear Parameters None. Default None. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. 372