D-Link DGS-3130 Emulator - Page 607

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This is a sample output from the show poe power-inline status command. Switch> show poe power-inline status Interface State Class Max(W) Used(W) Description eth3/0/1 delivering class-1 4 3.4 IP-camera-1 eth3/0/2 delivering class-2 10 6.3 12345678901234567890123456789012 !--- Output suppressed... eth4/0/1 delivering class-3 15.4 13.0eth4/0/2 delivering class-3 15.4 eth4/0/3 disabled n/a 0 0 eth4/0/4 searching n/a 11.0 0 !--- Output suppressed... eth5/0/24 disabled n/a 0 0 eth5/0/25 faulty[2] n/a 0 0 12.4 Faulty code: [1] MPS (Maintain Power Signature) Absent [2] PD short [3] Overload [4] Power Denied [5] Thermal Shutdown [6] Startup Failure [7] Classification Failure Switch> 56-10 show poe power module This command is used to display the setting and actual values of the power modules. show poe power module [unit UNIT-ID] [detail] Parameters detail UNIT-ID (Optional) In addition to the power information, more detailed chip parameter information is displayed. (Optional) Specify the unit to display. Default None. Command Mode EXEC mode or any configuration mode. Command Default Level Level: 1. Usage Guideline This command could display the detailed power information and PoE chip parameters for PoE modules. 603