D-Link DGS-3130 Emulator - Page 411
Interface Commands
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 38. Interface Commands 38-1 clear counters This command is used to clear counters for the specified interfaces. clear counters {all | interface INTERFACE-ID [, | -]} Parameters all interface INTERFACE-ID , - Specifies to clear counters for all interfaces. Specifies the interfaces to be configured. The interfaces can be physical ports, the OOB management port, port-channels or Layer 2 VLAN interfaces. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline Use this command to clear counters for a physical port interface. Example This example shows how to clear the counters of ethernet 1/0/1. Switch# clear counters interface ethernet 1/0/1 Switch# 38-2 description This command is used to add a description to an interface. Use the no form of this command to delete the description. description STRING no description Parameters STRING Specifies a description for an interface with a maximum of 64 characters. 407
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/411.png)