D-Link DGS-3130 Emulator - Page 54
match mac address
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# vlan access-map vlan-map 20 Switch(config-access-map)# match ipv6 address sp1 Switch(config-access-map)# end Switch# show vlan access-map VLAN access-map vlan-map 20 match ipv6 address: sp1(ID: 12999) action: forward Switch# 4-13 match mac address This command is used to associate MAC access lists for the configured sub-maps. Use the no form of this command to remove the matched entry. match mac address {ACL-NAME} no match mac address Parameters ACL-NAME Specifies the name of the ACL MAC access list to be configured. The name can be up to 32 characters. Default None. Command Mode VLAN Access-map Sub-map Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to associate a MAC access list with the configured sub-map. One sub-map can only be associated with one access list (IP access list, IPv6 access list, or MAC access list). The MAC sub-map only checks non-IP packets. Newer commands will overwrite the previous settings. Example This example shows how to set the match content in the sub-map. 50