D-Link DGS-3130 Emulator - Page 164

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# debug clear error-log Switch# 15-7 debug show buffer This command is used to display the content of the debug buffer or utilization information of the debug buffer. debug show buffer [utilization] Parameters utilization (Optional) Specifies to display the utilization of the debug buffer. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 15. Usage Guideline Use this command to display the content of the debug buffer or utilization information of the debug buffer. If no optional parameter is specified, this will display the content in the buffer. Example This example shows how to display the debug buffer information. Switch# debug show buffer Debug buffer is empty Switch# This example shows how to display the debug buffer utilization. Switch# debug show buffer utilization Debug buffer is allocated from system memory Total size is 2M Utilization is 30% Switch# 15-8 debug show output This command is used to display the debug status and output information of the modules. 160