D-Link DGS-3130 Emulator - Page 572
Multicast VLAN Commands
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 572 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 53. Multicast VLAN Commands 53-1 mvlan enable This command is used to enable multicast VLAN and configure some options for the multicast VLAN feature. Use the no form of this command to disable the state or revert to the default settings. mvlan {ipv4 enable | ipv6 enable} no mvlan {ipv4 enable | ipv6 enable} Parameters ipv4 enable ipv6 enable Specifies to enable the IPv4 IGMP control packet process in multicast VLAN. Specifies to enable the IPv6 MLD control packet process in multicast VLAN. Default Multicast VLAN for the IPv4 packet process is disabled. Multicast VLAN for the IPv6 packet process is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable or disable multicast VLAN and configure some options for the multicast VLAN feature. Example This example shows how to enable the multicast VLAN feature for IPv4 multicast packets. Switch# configure terminal Switch(config)# mvlan ipv4 enable Switch(config)# 53-2 mvlan This command is used to configure characteristics of the multicast VLAN feature. Use the no form of this command to revert to the default setting. mvlan {forward-unmatched | ignore-vlan} no mvlan {forward-unmatched | ignore-vlan} Parameters forward-unmatched Specifies that the packet will be forwarded or dropped if the received IGMP or MLD control packet is either untagged or does not match any profile, and the 568