D-Link DGS-3130 Emulator - Page 67

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# show vlan access-map VLAN access-map vlan-map 10 match ip access list: stp_ip1(ID: 1888) action: forward Counter enable on VLAN(s): 1-2 match count: 8541 packets VLAN access-map vlan-map 20 match mac access list: ext_mac(ID: 6995) action: redirect eth1/0/5 Counter enable on VLAN(s): 1-2 match count: 5647 packets Switch# 4-21 show vlan filter This command is used to display the VLAN filter configuration of VLAN interfaces. show vlan filter [access-map MAP-NAME | vlan VLAN-ID] Parameters access-map MAP-NAME vlan VLAN-ID (Optional) Specifies the name of the VLAN access map. The name can be up to 32 characters. (Optional) Specifies the VLAN ID. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline The show vlan filter access-map command is used to display the VLAN filter information by access map. The command show vlan filter vlan is used to display the VLAN filter information by VLAN. Example This example shows how to display VLAN filter information. 63