D-Link DGS-3130 Emulator - Page 130
Interface Configuration Mode.
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Default By default, this option is disabled. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to configure the IP directed broadcast state for an interface. This command does not affect unicast routing of the IP directed broadcast, forwarding of the IP directed broadcast packet whose destination networks are not subnets local to the Switch. This command only affects the forwarding of IP directed broadcast packets whose destination networks are subnets local to the Switch. If the IP directed broadcast option is enabled, then these packets are translated to broadcast and forwarded to all the hosts in the destination subnet. The forwarded interface can be the receiving interface or other interfaces of the Switch. Example This example shows how to enable the IP directed broadcast feature on the interface of VLAN 100. Switch# configure terminal Switch(config)# interface vlan 100 Switch(config-if)# ip directed-broadcast Switch(config-if)# 126
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/130.png)