D-Link DGS-3130 Emulator - Page 512

Parameters DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide port-description system-capabilities system-description system-name (Optional) Specifies the port description TLV to send. The port description TLV allows for the IEEE 802 LAN station's port description to be advertised. (Optional) Specifies the system capabilities TLV to send. The system capabilities field will contain a bit-map of the capabilities that defines the primary functions of the system. (Optional) Specifies the system description TLV to send. The system description should include the full name and version identification of the system's hardware type, software operating system, and networking software. (Optional) Specifies the system name TLV to send. The system name should be the system's fully qualified domain name. Default No optional 802.1AB basic management TLV is selected. Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is available for physical port configuration. This command is used to select the optional TLVs to be transmitted. If the optional TLVs advertisement is selected, they will be encapsulated in the LLDPDU and sent to other devices. Example This example shows how to enable all supported optional 802.1AB basic management TLVs. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# lldp tlv-select Switch(config-if)# This example shows how to enable advertising the system name TLV. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# lldp tlv-select system-name Switch(config-if)# 48-14 lldp transmit This command is used to enable the LLDP advertise (transmit) capability. Use the no form of this command to disable LLDP transmission. lldp transmit no lldp transmit 508