D-Link DGS-3130 Emulator - Page 620

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Command Mode Interface Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enable or disable the specified port's EEE power saving function. The EEE power-saving mode saves power consumption while a link is up when there is low utilization of packet traffic. The physical interface will enter into a Low Power Idle (LPI) mode when there is no data to be transmitted. In the EEE powersaving mode, power consumption is scalable to the actual bandwidth utilization. Example This example shows how to enable the EEE power saving function. Switch# configure terminal Switch(config)# interface ethernet 1/0/1 Switch(config-if)# power-saving eee Switch(config-if)# 59-4 power-saving dim-led time-range This command is used to configure the time range profile for the dim LED schedule. Use the no form of this command to delete the specified time range profile. power-saving dim-led time-range PROFILE-NAME no power-saving dim-led time-range PROFILE-NAME Parameters PROFILE-NAME Specifies the name of the time range profile to be configured. The maximum length is 32 characters. Default None. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to add or delete a time range profile for the dim LED schedule. When the schedule is up, all port's LED will be turned off. Example This example shows how to add a time-range profile for the dim LED schedule. 616