D-Link DGS-3130 Emulator - Page 372
activate
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Revertive / Non-revertive Instance Status RPL Role Port0 / Port1 RPL Port Ring port0/port1 state RingType Ring instances are operated revertively or non-revertively in the profile. The current ring node status of the ERPS instance. (Deactivated / Init / Idle / Protection / force / manual / pending) The current config/running config ring node role of the ERPS instance. (Owner / Neighbor / None) The current config/running config ring port role. (Interface_id / virtual_channel) The current config/running RPL. (Port0 / Port1 / None) The state for ring ports of the ERPS instance. (Forwarding / Blocking / SF / SF blocked) Indicates either Major ring or Sub ring. 33-17 activate This command is used to activate an ERPS instance. Use the no form of this command to deactivate an ERPS instance. activate no activate Parameters None. Default By default, this option is disabled. Command Mode ERPS Instance Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to activate an ERPS instance. The ring ports, and APS channel must be configured first before an ERPS instance can be activated. In addition to these configurations, the configuration of service protected VLANs and RPL related settings are fundamental for operation of an ERPS instance. Example This example shows how to activate the major ring instance 1. Switch# configure terminal Switch(config)# ethernet ring g8032 major-ring Switch(config-erps-ring)# instance 1 Switch(config-erps-ring-instance)# profile campus Switch(config-erps-ring-instance)# activate Switch(config-erps-ring-instance)# 368