D-Link DGS-3130 Emulator - Page 765

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 76. Simple Network Management Protocol (SNMP) Commands 76-1 show snmp This command is used to display the SNMP settings. show snmp {community | host | view | group | engineID} Parameters community host view group engineID Specifies to display SNMP community information. Specifies to display SNMP trap recipient information. Specifies to display SNMP view information. Specifies to display SNMP group information. Specifies to display SNMP local engine ID information. Default None. Command Mode Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 12. Usage Guideline This command displays the SNMP information. When displaying SNMP community strings, the SNMPv1 or SNMPv2c user created will not be displayed. Example This example shows how to display SNMP community information. Switch#show snmp community Community : public Access : read-only View : CommunityView Community : private Access : read-write View : CommunityView Total Entries: 2 Switch# This example shows how to display the SNMP server host setting. 761