D-Link DGS-3130 Emulator - Page 44

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# show access-list ip R&D Extended IP access list R&D(ID: 3552) 10 permit tcp any 10.20.0.0 0.0.255.255 20 permit tcp any host 10.100.1.2 30 permit icmp any any Switch(config)#ip access-list extended R&D Switch(config-ip-ext-acl)# 5 permit tcp any 10.30.0.0 0.0.255.255 Switch(config-ip-ext-acl)# exit Switch(config)# show access-list ip R&D Extended IP access list R&D(ID: 3552) 5 permit tcp any 10.30.0.0 0.0.255.255 10 permit tcp any 10.20.0.0 0.0.255.255 20 permit tcp any host 10.100.1.2 30 permit icmp any any Switch(config)# access-list resequence R&D 1 2 Switch(config)# show access-list ip R&D Extended IP access list R&D(ID: 3552) 1 permit tcp any 10.30.0.0 0.0.255.255 3 permit tcp any 10.20.0.0 0.0.255.255 5 permit tcp any host 10.100.1.2 7 permit icmp any any Switch(config)# 4-2 action This command is used to configure the forward, drop, or redirect action of the sub-map in the VLAN access-map sub-map configuration mode. Use the no form of this command to revert to the default setting. action {forward | drop | redirect INTERFACE-ID} no action Parameters forward drop redirect INTERFACE-ID Specifies to forward the packet when matched. Specifies to drop the packet when matched. Specifies the interface ID for the redirection action. Only physical ports are allowed to be specified. Default By default, the action is forward. Command Mode VLAN Access-map Sub-map Configuration Mode. 40