D-Link DGS-3130 Emulator - Page 871
sntp enable, sntp interval
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 871 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Example This example shows how to configure a switch to allow its software clock to be synchronized with the clock by the SNTP server at IP address 192.168.22.44. Switch# configure terminal Switch(config)# sntp server 192.168.22.44 Switch(config)# 86-7 sntp enable This command is used to enable the SNTP function. Use the no form of this command to disable the SNTP function. sntp enable no sntp enable Parameters None. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command is used to enable or disable the SNTP function. Example This example shows how to enable the SNTP function. Switch# configure terminal Switch(config)# sntp enable Switch(config)# 86-8 sntp interval This command is used to set the interval for the SNTP client to synchronize its clock with the server. Use the no form of this command to revert to the default setting. sntp interval SECONDS no sntp interval Parameters SECONDS Specifies the synchronization interval from 30 to 99999 seconds. 867