D-Link DGS-3130 Emulator - Page 741
ip ssh service-port, show crypto key mypubkey
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 741 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch# configure terminal Switch(config)# ip ssh server Switch(config)# 72-5 ip ssh service-port This command is used to specify the service port for SSH. Use the no form of this command to revert to the default setting. ip ssh service-port TCP-PORT no ip ssh service-port Parameters TCP-PORT Specifies the TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the SSH protocol is 22. Default By default, this value is 22. Command Mode Global Configuration Mode. Command Default Level Level: 12. Usage Guideline This command configures the TCP port number for SSH server. Example This example shows how to change the service port number to 3000. Switch# configure terminal Switch(config)# ip ssh service-port 3000 Switch(config)# 72-6 show crypto key mypubkey This command is used to display the RSA or DSA public key pairs. show crypto key mypubkey {rsa | dsa} Parameters rsa dsa Specifies to display information regarding the RSA public key. Specifies to display information regarding the DSA public key. 737
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/741.png)