D-Link DGS-3130 Emulator - Page 154

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 12-3 clear cable-diagnostics This command is used to clear the test results for the cable diagnostics. clear cable-diagnostics {all | interface INTERFACE-ID [, | -]} Parameters all interface INTERFACE-ID , - Specifies to clear cable diagnostics results for all interfaces. Specifies the interface's ID. The acceptable interface will be a physical port. (Optional) Specifies a series of interfaces, or separate a range of interfaces from a previous range. No space before and after the comma. (Optional) Specifies a range of interfaces. No space before and after the hyphen. Default None. Command Mode EXEC Mode. Command Default Level Level: 1. Usage Guideline This command is used to clear the test results for the cable diagnostics. If the test is running on the interface, an error message will be displayed. Example This example shows how to clear the test results for the cable diagnostics. Switch# clear cable-diagnostics interface ethernet 1/0/1 Switch# 150