D-Link DGS-3130 Emulator - Page 711

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 68-13 show ip rip database This command is used to display the Routing Information Protocol (RIP) routing database. show ip rip database [IP-ADDRESS MASK | NETWORK-PREFIX/PREFIX-LENGTH] Parameters IP-ADDRESS MASK NETWORKPREFIX/PREFIX-LENGTH (Optional) Specifies the address of the routing information that should be displayed. (Optional) Specifies the subnet prefix and the prefix length of the network to be displayed. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to display the entry in the RIP routing database. Example This example shows how to display the RIP routing database. Switch#show ip rip database Codes: R - RIP, Rc - RIP connected, K - Kernel, C - Connected, S - Static, O - OSPF, B - BGP, I-IS-IS, A - Aggregate Network Next Hop Metric From If Time Rc 11.0.0.0/8 R 105.100.0.0/24 Rc 107.100.0.0/16 R 212.254.254.0/24 11.0.0.5 11.0.0.254 1 2 11.0.0.5 1 2 11.0.0.254 vlan 11 vlan 11 vlan 1 vlan 11 0DT0H0M2S 0DT0H0M10S Total Entries: 4 entries, 4 routes Switch# 68-14 show ip rip interface This command is used to display interface specific information for RIP. 707