D-Link DGS-3130 Emulator - Page 419

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide dot3StatsSingleColFrame s Transmit Single Collision Frame Counter. 10/100 mode only-incremented for each frame transmitted which experienced exactly one collision during transmission. dot3StatsMultiColFrames Transmit Multiple Collision Frame Counter. 10/100 mode only-incremented for each frame successfully transmitted for which transmission is inhibited by more than one collision. dot3StatsDeferredTransmi Transmit Single Deferral Frame Counter. 10/100 mode only-incremented for sions each frame which was deferred on its first transmission attempt and did not experience any subsequence collisions during transmission. dot3StatsLateCollisions Transmit Late Collision Frame Counter. 10/100 mode only-incremented for each frame transmitted which experienced a late collision during a transmission attempt. dot3StatsExcessiveCollisi Transmit Excessive Collision Frame Counter. 10/100 mode only-incremented ons for each frame transmitted for which transmission fails due to excessive collisions. dot3StatsInternalMacTran smitErrors Transmit Internal MAC Error Frame counter. Incremented for frames for which transmission fails due to an internal MAC sublayer transmitting error. A frame is only counted if it is not counted by any of the dot3StatsLateCollisions, the dot3StatsExcessiveCollisions, and the dot3StatsCarrierSenseErrors. dot3StatsFrameTooLongs Receive Frame Too Long Counter. Incremented for each frame received which exceeds the max-rcv-frame-size. 38-6 show interfaces This command is used to display the interface information. show interfaces [INTERFACE-ID [, | -]] Parameters INTERFACE-ID , - (Optional) Specifies that the interface can be a physical port, VLAN, loopback interface, or other. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode User/Privileged EXEC Mode. Any Configuration Mode. Command Default Level Level: 1. Usage Guideline If no interface was specified, all existing interfaces will be displayed. 415