D-Link DGS-3130 Emulator - Page 359
tcn-propagation, r-aps channel-vlan
![]() |
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 359 highlights
DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Switch#configure terminal Switch(config)#ethernet ring g8032 profile campus Switch(config-erps-ring-profile)#timer guard 700 Switch(config-erps-ring-profile)#timer hold-off 1 Switch(config-erps-ring-profile)#timer wtr 1 Switch(config-erps-ring-profile)# 33-4 tcn-propagation This command is used to enable the propagation of topology change notifications from the sub-ERPS instance to the major instance. Use the no form of this command to disable the propagation of topology change notifications. tcn-propagation no tcn-propagation Parameters None. Default By default, this option is disabled. Command Mode G.8032 Profile Configuration Mode. Command Default Level Level: 12. Usage Guideline Use this command to enable the propagation of topology change notifications from the sub-ring instance to other ring instances. Example This example shows how to enable the TCN propagation state for the G.8032 profile "campus". Switch#configure terminal Switch(config)#ethernet ring g8032 profile campus Switch(config-erps-ring-profile)#tcn-propagation Switch(config-erps-ring-profile)# 33-5 r-aps channel-vlan This command is used to specify the APS channel VLAN for an ERPS instance. Use the no form of this command to remove the configuration. r-aps channel-vlan VLAN-ID no r-aps channel-vlan 355
![](/manual_guide/products/dlink-dgs3130-emulator-9c3be7f/359.png)