D-Link DGS-3130 Emulator - Page 800

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide Any Configuration Mode. Command Default Level Level: 1. Usage Guideline Use this command to display Spanning Tree interface level configuration. The command can be used for all STP versions. Example This example shows how to display spanning tree configuration information for ethernet 1/0/1. Switch#show spanning-tree configuration interface ethernet 1/0/1 eth1/0/1 Spanning tree state : Enabled Port path cost: 0 Port priority: 128 Port Identifier: 128.1 Link type: auto Port fast: edge Guard root: Disabled TCN filter : Disabled Bpdu forward: Disabled Switch# 78-5 snmp-server enable traps stp This command is used to enable the spanning tree to send SNMP notifications for STP. Use the no form of this command to disable the sending of notifications for STP. snmp-server enable traps stp [new-root] [topology-chg] no snmp-server enable traps stp [new-root] [topology-chg] Parameters new-root topology-chg (Optional) Specifies the sending of STP new root notification. (Optional) Specifies the sending of STP topology change notification. Default By default, this option is disabled. Command Mode Global Configuration Mode. Command Default Level Level: 12. 796