D-Link DGS-3130 Emulator - Page 501

DGS-3130 Layer 3 Stackable Managed Switch CLI Reference Guide 48. Link Layer Discovery Protocol (LLDP) Commands 48-1 clear lldp counters This command is used to delete LLDP statistics. clear lldp counters [all | interface INTERFACE-ID [, | -]] Parameters all interface INTERFACE-ID , - (Optional) Specifies to clear LLDP counter information for all interfaces and global LLDP statistics. (Optional) Specifies the interface to clear LLDP counter information. Valid interfaces are physical interfaces. (Optional) Specifies a series of interfaces or separates a range of interfaces from a previous range. No space is allowed before or after the comma. (Optional) Specifies a range of interfaces. No space is allowed before or after the hyphen. Default None. Command Mode Privileged EXEC Mode. Command Default Level Level: 12. Usage Guideline Use this command with the interface keyword to reset LLDP statistics of the specified interface(s). If the command clear lldp counters is issued with the all keyword to clear global LLDP statistics and the LLDP statistics on all interfaces. When no optional parameter is configured, only the LLDP global counters will be cleared. Example This example shows how to clear all LLDP statistics. Switch# clear lldp counters all Switch# 48-2 clear lldp table This command is used to delete all LLDP information learned from neighboring devices. clear lldp table {all | interface INTERFACE-ID [, | -]} 497